A21 Technological Development in Heat Exchangers 2 09:20 〜 10:40 |
|
---|---|
A211 |
The Visualization of Two-Phase Flow Refrigerant Distribution of Vertical Header with Insertion Structure of Branch Pipe to Main Pipe
|
A212 |
A Characteristic of Distribution of R134a Two-phase Flow in a Horizontal Multi Tube
Change the shape of Header Pipe for improvement of Mal-Distribution in vertical Upward Flow |
A213 |
Gas-Liquid Distribution of Refrigerant Flow in Multi-pass Channels with Vertical Headers
Measurements of Gas-Liquid Distribution Ratios and Pressure Losses |
A214 |
Variational Formulation of Two-phase Flow Distribution using Electric-circuit Analogy
|
A22 Technological Development in Heat Exchangers 3 11:00 〜 12:20 |
|
---|---|
A221 |
Air-side performance of Fin-flat-tube heat exchanger
|
A222 |
Prediction of Fin efficiency and External Heat Transfer Coefficient and Pressure Drop of Cross-Finned Flat Tube Heat Exchangers
|
A223 |
Method for improving air-side heat transfer using metal sintered body
|
A224 |
Heat transfer and pressure drop characteristics of curved tube with discrete ribs for ground source heat exchanger
|
A23 Technological Development in Heat Exchangers 4 13:30 〜 14:50 |
|
---|---|
A231 |
Progress in heat transfer field with MEMS technology
|
A232 |
Visualization and Void Fraction Measurement of Refrigerant Flow in Cross-Flow Type Mini-channel Evaporator
Improvement effect in flow distribution by using perforate or offset rib. |
A233 |
A Study on Quality Measurement in Refrigeration Cycle (Ⅱ)
|
B21 General Session 1 11:00 〜 12:20 |
|
---|---|
B211 |
Next Generation Low-GWP Refrigerant "AMOLEA"
|
B212 |
Clarification of disproportionation reaction of HFO-1123 and evaluation of reaction inhibitor
|
B213 |
Effect of Lubricant Additive on Diesel Combustion Characteristics of Compressor during Pump-Down of Air Conditioner
|
B214 |
Development of a large capacity compound-type centrifugal chiller and centrifugal heat pump using R1234ze (E)
|
B22 General Session 2 13:30 〜 14:50 |
|
---|---|
B221 |
Field environment measurement using wireless sensing unit
|
B222 |
Effect of subcooling water flow rate on the energy conservation of refrigerated cabinet by using PCM
|
B223 |
Research on energy saving performance in home air conditioner
|
B224 |
Examination of Correspondence to ZEH and Energy Management in Detached House
|
C21 Advancement in HVAC&R Technologies in Asia 1 10:40 〜 12:20 |
|
---|---|
C211 |
AN EXPERIMENTAL STUDY OF LARGE-SCALE GRAPHENE-BASED MEMBRANE USED IN ENTHALPY RECOVERY VENTILATORS
|
C212 |
Performance investigation of a new HVAC system for electric vehicle
|
C213 |
Field Test of an Optimal Control method for Central air-conditioning water-side systems.
|
C214 |
A parametric analysis on the performance of adsorption rotating wheel desiccant systems
|
C215 |
A high efficient DC drive inverter control duo loop air-cooled chiller
|
C22 Advancement in HVAC&R Technologies in Asia 2 13:30 〜 15:10 |
|
---|---|
C221 |
CFD investigation for a solar-driven ventilation cooling system of vehicle
|
C222 |
Apply CFD and Taguchi Method to Optimize Motorcycle Helmet Cooling Effect
|
C223 |
The Development of the Optimized Casing Shape with Superior Hydraulic Performance for a Split-Type Air-Conditioner
|
C224 |
Heat transfer and pressure drop during condensation of R1234yf inside a 2.5 mm OD microfin tube.
|
C225 |
Air bubbles in frozen two-dimensional water droplets
凍結二次元水滴中の気泡 |
D21 Seminar on compressor technology 1 09:20 〜 10:40 |
|
---|---|
D211 |
High Efficiency Reciprocating Compressor with Low-speed Oil pump for Refrigerator
|
D212 |
Development of Outer Rotor Fan motor for Air conditioning
|
D213 |
A CFD simulation of gas-liquid two-phase flow in a screw compressor by using SCORG and PumpLinx
|
D214 |
Presentation of hydro-dynamic lubrication calculation method for tribology needs
|
D22 Seminar on compressor technology 2 11:00 〜 12:20 |
|
---|---|
D221 |
Adaptability of CFD analysis in the oil circulation design of the scroll compressor
|
D222 |
Development of Self-Healable Superhydrophilic Materials
|
D223 |
Development of Mist Type Cooling Equipment for Outdoor Space using Ultra-miniaturization Technology of Mist
|
D224 |
Reduction of energy consumption by temperature and humidity individual control system
|
D23 Present status and future development of compressors 1 13:30 〜 15:10 |
|
---|---|
D231 |
Visualization inside compressor of using transmission X-ray
|
D232 |
Measurements of oil level and refrigerant concentration in oil by maximum bubble pressure method
|
D233 |
LEAKAGE AND FRICTION MEASUREMENT UNDER TIP SEAL OF SCROLL COMPRESSOR
|
D234 |
Experimental Study of Leakage Reduction on Reciprocating Compressor(2nd Report)
|
D235 |
Fundamental study on a rotary expander for a miniature Rankin cycle system using waste heat
|
E21 Desiccant/Humidity Control/Open Cycle Air Conditioning 1 09:20 〜 10:40 |
|
---|---|
E211 |
Challenge to new air conditioning technology realization
Smart hydrogels that absorb moisture and ooze water |
E212 |
Investigation of air-conditiioning system performance utilizing solor energy in snowy region
|
E213 |
Performance evaluation on desiccant air conditioning system
|
E214 |
Study on Latent Heat Sensible Heat Separation Air Conditioning
3rd Report: Development of outside air treatment air conditioner using lithium chloride solution |
E22 Desiccant/Humidity Control/Open Cycle Air Conditioning 2 11:00 〜 12:20 |
|
---|---|
E221 |
Performance evaluation on enhanced polymer sorbent
|
E222 |
Sorption characteristics of a thermal storage vessel using organic sorbent particles
|
E223 |
Experimental analysis of dehumidification and humidification characteristics of desiccant module
|
E224 |
Heat and mass transfer of gas-liquid contactor for liquid desiccant air-conditioning system
|
E23 Refrigerators/Heat Pumps based on Absorption, Adsorption or Chemical Reactions 5 13:30 〜 14:50 |
|
---|---|
E231 |
Preparation of LiOH/Mesoporous Carbon Composites and Their Hydration Characteristics
|
E232 |
Formation of Adsorbent Layer on Aluminum Substrate and Its Water Vapor Adsorption Characteristics
|
E233 |
Heat Storing and Releasing Characteristics of Chemical Heat Storage System with LiOH/Mesoporous Carbon Composite Material
|
E234 |
Study on heat battery working by using oxidation and reduction reversible reaction
|